Rubber-steel gaskets for pipeline construction
Rubber-steel flange gaskets from Kroll & Ziller are used for the secure sealing of flange connections in all areas of pipeline construction.The use of rubber-steel gaskets is particularly recommended for applicationswhere asecure sealing with low surface pressureis required.
The rubber-steel flange gaskets have a steel insert vulcanized into an elastomeric material. During vulcanization, extreme adhesion is achieved between the steel core and the rubber coating. Even under the highest stresses, this makes it impossible to shift, detach or blow out.
The gaskets have a wide range of uses depending on the elastomer in question and are suitable for water, steam, gas, air, acids, alkalis, hydrocarbons, among other things, with operating temperatures of up to approx. 200 °C being possible. Rubber-steel gaskets are used as industrial gaskets and meet the requirements of TA Luft. This depends on the materialand various other requirements, such as the application in thedrinking water, gas, food, etc. sector.
Your advantages when using rubber-steel-gaskets
Tightness even at low surface pressure (even at low tightening torques)
Very good adaptability to the sealing surfaces
Low leakage rates thanks to homogeneous structure of elastomeric materials
Blow-out safety and maximum stability due to centrally positioned, corrosion-protected and vulcanized steel inlay
Optimum handling when installing the gasket
DN15 to DN2000
NR, NBR-DUO-EL, EPDM, CSM, HNBR, BIIR, FKM, CR
Based on DIN EN 1514-1 & DIN 2590, ASME-B 16.21
Inlay: Steel (S235JR), Various stainless steels (1.4301, 1.4571) & others on request
Delivery program rubber-steel flange gaskets
G-ST / Guss
G-ST-P / Steel flanges
G-ST-P / Plastic flanges
G-ST-P / OE
G-ST / FD
Are you looking for the perfect rubber-steel gasket for your application? We have the solution!
You can find our complete delivery program of rubber-steel seals in our product catalog.
Variants of rubber-steel gaskets
Various elastomers are available for our rubber-steel gaskets and industrial gaskets:
(Acrylonitrile butadiene rubber)
NBR-DUO-EL certified for drinking water and gas supply in accordance with the applicable standards and regulations.
With certification for drinking water according to DIN-EN-681-1, as well as further requirements in the automotive industry up to power plant and air conditioning technology.
(Ethylene propylene diene rubber)
Thanks to its excellent chemical resistance and good strength values, EPDM is used in almost all areas – from vehicle construction and the building industry to conveyor belts, industrial hoses and flexible piping.
(Hydrogenatedacrylonitrile butadiene rubber)
Due to the very good aging resistance and mechanical strength, this material is particularly suitable for use at high temperatures and mechanical loads.
The chlorine in the CSM provides good flame retardancy and mineral oil resistance. Furthermore, CSM is characterized by good chemical resistance.
This material is used in particular where high resistance to oils, greases, low temperatures, embrittlement and the effects of weather and ozone are required.
Very low gas permeability (air, water vapor and other gases), good resistance to heat, ozone, oxygen and chemicals give this material good sealing properties.
Especially when high resistance to chemicals and high/low temperatures is required, FKM is the first choice. In vacuum applications, FKM ensures best results due to its good gas density.
Please contact us
Kroll & Ziller Germany
P.O. Box 970
Phone .: 0049 (0) 2103 / 951- 0
Fax: 0049 (0) 2103 / 951-510
Phone .: 0049 (0) 2103 / 951- 0
Fax: 0049 (0) 2103 / 951-508 / 509